Contact Us Today! | (262) 784-3340

Knowledge & Insights: Fabrication

Tuthill/Hypro Oil Filter Skid

This oil filter skid was designed for an industrial refrigeration designer/builder contractor. The contractor wanted to be able to filter oil inline on ammonia compressors and ultimately chose a Tuthill L-Series gear pump to side stream the oil. It’s preferred to have a system that side streams the oil, rather than a system with the […]

Read More »

Split Case Pump Overhaul

Pictured is a Split Case Pump that had obvious past repair issues. The pump was brought to Anderson by a customer that made rolled aluminum products. Among the chief issues, the impeller clearance and shaft sleeves were not set properly, which resulted in severe wear to the entire rotating assembly. As a result, the shaft […]

Read More »

Blackmer Gear G1-133 Pump Additions

These Blackmer Gear G1-133 pump assemblies were built for an adhesives manufacturer for processing PVA adhesives (poly vinyl alcohol). They are made of stainless steel and have 4” flanges. An addition we provided was a stainless-steel guard around the stuffing box at the customer’s request for extra protection. We also welded risers on our standard […]

Read More »

Water Tempering Skid

This water tempering skid was designed for an aerosol and bag on valve filling manufacturer. The manufacturer needed a way to heat up 194 gallons of batch water in their pressurized tank (able to fill 75 cans per minute), so they could test their product can’s integrity at 135 degrees Fahrenheit. The water tempering skid […]

Read More »

Roto Pump Skid

Pictured below is a Roto progressive cavity pump skid we designed for a food manufacturer. The assembly featured a Roto progressive cavity pump belt driven by a 10 HP WEG Motor. Both the pump and the motor were mounted on a stainless steel base. We were able to engineer a more convenient solution for how […]

Read More »

Cooling Skid System

Pictured below is a cooling skid designed for an orthopedic product manufacturer who makes artificial replacement parts for the human body. The customer needed a way to keep the air compressors and air dryer used in their production process from overheating. Our solution was a system that utilizes a cooling tower. The system recirculates cool […]

Read More »

Xylem Booster Pump Package

Extra features are nice to have, but at the end of the day it’s really about what gets the job done. Our customer was looking for a more economical booster pump system similar to larger booster pump packages without the non-essential features. Our solution (pictured below) is a practical, engineered assembly consisting of (2) Goulds […]

Read More »

Mixmor Mixer and Tank Assembly

This MixMor turbine mixer with mixing tank assembly was designed for a midwest chemical manufacturer. The manufacturer’s business was expanding, and they wanted a new mixer and tank to double their production rate. The assembly features a MixMor TC-20-L52 flange mounted turbine mixer with a TEFC Motor (20 HP, 1750 RPM, 3/60, 230/460 VOLT), gear […]

Read More »

Viking Asphalt Pump Refurbishment

A customer’s worn Viking asphalt pump was in rough shape. One of our experienced technicians refurbished the pump and the difference is night and day. View the astonishing transformation in the pictures below. Anderson Process is an authorized service center for many of the top pump manufacturers in the marketplace. Some of our capabilities include […]

Read More »

Tuthill Hydraulic Oil Pump Assemblies

These Tuthill pump assemblies were fabricated for a healthcare technology company and used to pump hydraulic oil. They feature a Tuthill 2C2BV-C-7 rotary gear pump assembled with a Tuthill 2C1B534-56 NEMA C Frame mounting adapter and a Baldor CL3507 Motor (¾ HP, 1725 RPM, 1/60/115/230V). Anderson Process continues to be a reliable service provider to […]

Read More »

Standard Pump Tote Batching System

This Standard Pump tote batching system was designed for a battery supplier, who was interested in a system to batch battery acid (sulfuric acid) out of a tote and into jugs. Pictured is the system we designed. A Standard stick pump was used for pumping the battery acid from the tote. A stainless steel bridge […]

Read More »

Tuthill Paint Skid

This paint mixing and transfer skid was designed for a manufacturer of radiators that are used to cool large transformers. Our customer wanted to be able to efficiently mix paint and other chemicals to produce the protective outer coating that is applied on their radiators. Our engineered solution consisted of two Tuthill Global Gear pumps […]

Read More »

Advanced Mixing Technology

One of our customers needed a solution to a 10-year-old mixing issue that was driving up operation costs in their facility. The process involves producing a water/polyvinyl acetate emulsion mix that is used as a bath for premoisturized fabric to be coated. The fabric coating requires an extremely consistent mix, and their existing equipment was […]

Read More »

Ampco Pharma Pump Skids

These are two portable Ampco pump skids built for a pharmaceutical and cosmetics contract manufacturer. They feature Ampco ZP1-060 pumps, along with Nord gear reducer, and a Weg motor mounted on a stainless steel cart with a Weg washdown VFD. Anderson Process continues to be a reliable service provider to many manufacturers throughout the Midwest. […]

Read More »

Chlorine Tank Refurbishment

We are always willing to go the extra mile for our customers, even when the project is just for show.  One of our customers wanted to remodel the front entryway at their corporate headquarters.  They asked us to refurbish an old chlorine tank to be used as a display piece. We accomplished this project by […]

Read More »

Blackmer Pump Cart For Adhesives

This mobile pump cart was designed for an adhesives manufacturer that needed to introduce additives and defoamer to an adhesive product. Due to systems already in place, the customer requested a mobile, turn-key solution that would offer minimal setup for integration. This assembly consisted of a Blackmer SX Series stainless steel vane pump coupled to […]

Read More »

Rail Car Chemical Pump

Rail Car Chemical Transfer

Chemical transports are one of the largest revenue streams for railroads in the United States. In 2019 close to 972 million tons of chemicals were shipped throughout the country due to their use in a diverse production of other goods. When transferring chemicals via rail car or tanker truck, the average capacity will be around […]

Read More »

Heavy-Duty Fuel Oil Pump

Pictured below is a large skid we developed. The skid features a 10’’ BLACKMER® HXL10 vane pump coupled to a 161 HP diesel motor through a Nord Parallel shaft gear reducer. The gear shaft reducer was selected to handle the intense force and pressure applied, as the unit would be pumping fuel oil at 1650 […]

Read More »

Stainless-Steel Tanks

Our Michigan facility built several stainless-steel tanks to be used by an industrial laundry service company. They offer cleaning of tough, gritty materials such as oil absorbents, industrial towels, and floor mats that are used in various manufacturing facilities. They previously used polyethylene tanks in their facility to hold the materials used for their cleaning […]

Read More »

Mobile Ingredient Pump

We custom fitted a 1” Wilden Stainless Steel FDA pump on a heavy-duty stainless steel hand cart with an RTI filter regular and Continental hose for the air input to the pump. This Wilden Full Stroke Diaphragm pump was used to transfer FDA Oils and Ingredients. It was built on a cart to optimize it […]

Read More »

Powder Coated Base with sand-blasted

The Advantages of Powder Coating

Industrial pumps and equipment operate in some of the most extreme working conditions. Over time certain physical impacts, moisture, chemicals, and ultraviolet light can cause corrosion and deterioration of parts, resulting in at worst a breakdown or at best a beaten down appearance. To combat this process Anderson Process offers powder coating finishes to skids […]

Read More »

Custom TIG Weld

Custom TIG Welds

Do clean welds get you excited? Part of a larger skids, these TIG welded piping components show the seamless integration of a engineered custom solutions to fit the needs of a unique fluid management system. Never compromise in optimizing your system.

Read More »

Self-Priming Pioneer Pump De-watering Skid

Several years ago the Anderson Process team custom engineered a pump skid for a gravel pit customer moving large amounts of aggregate.  The pump consisted of a large Pioneer GS8 Pump Assembly designed for pumping water 2,000 GPM at 60 Feet of head. The self-priming, solids handling, centrifugal pump was put on a fabricated steel […]

Read More »