Contact Us Today! | (262) 784-3340

Knowledge & Insights: Heat Exchangers

Custom Temperature Control Skid

We recently had a customer that needed to build a temperature control skid that used a Dean pump to pump Therminol out of a storage tank and send it though a heating or cooling heat exchanger to control the temperature of the oil by the uses of control valves. The heating heat exchanger was a […]

Read More »

blank

Chemical Treatment Recirculating Skids

Here we helped a customer build a series of chemical treatment recirculating skids that heated and filtered the chemical before it was sent off to the process. The overall system was designed for 75 GPM at 40 PSI. We utilized a Goulds 3756 centrifugal pump, Standard Xchange Plate & Frame heat exchanger, Eaton Filters, Dixon […]

Read More »

blank

Let us help you size the right heat exchanger for your application

Do you need to cool, heat or maintain temperature of sensitive liquids? Reach out to us to help you size the right heat exchanger for your application. We have Xylem – Standard Xchange Pre-engineered Shell & Tube, Brazed or Fan units on the shelf ready to go or we can help you design a custom […]

Read More »

blank

Solution for Recycling Used Oil from a Transmission Test System

We just sent this cart out to a customer to get installed. We worked with this customer to design and build a solution for recycling used oil from a transmission test system and refine it for re-use. It is part of a larger transmission test system that is used for testing on several types of […]

Read More »

blank

Heating Skid

We worked with a customer to develop a heating skid to keep their product (Mixture of RO Water and Dimethylformamide) temperatures in bulk storage tanks at the proper temperature. When they needed to transfer the product to the production line for use, it was already at the necessary temperature, filtered to specification and ready for […]

Read More »

blank

Cooling Skids

We just recently put the finishing touches on two complex cooling skids for a Wisconsin foundry that was installing a new line. They were designed to re-use spent cooling tower water, which would then run through one side of a Standard Xchange heat exchanger and then cool a glycol mixture on the other side of the Standard […]

Read More »

blank

Xylem System

Customer: Metal Manufacturer Need/Application: Customer was looking to install new equipment to speed up their manufacturing. Solution: Built a Xylem system that could take 120°F of water and cool it to 90°F at 40 GPM. The system included the following: 2 pumps (duplex pump with VFD controls, pressure switches and alternator), control panel, differential pressure switch, heat exchanger, […]

Read More »

blank

EnviroGear System

Customer: Waste Disposal Provider Need/Application: Needed to heat a 6,000 gallon tank of glycerin. Solution: Provided a skid unit with a EnviroGear pump to recirculate glycerin from the tank into both the Standard Plate and frame heat exchanger. The skid also has a electric heater to heat the water with a Xylem pump to recirculate the water from […]

Read More »