Contact Us Today! | (262) 784-3340

Knowledge & Insights: Valves

Xylem Pressure Control Skid

We built this pressure control skid featuring a Goulds Water Technology NPE pump, Aquavar variable speed pump controller, a HydroPro surge tank and Dixon Valve ball valves. Built to control and pump water at consistent pressure, the skid is mounted on painted carbon steel C-Channel base plate with lifting lugs and piped with SCH40 pipe.

Read More »

Cooling Tower Filtration

Built to filter cooling water in a cooling tower basin, this filter skid features a Xylem (Goulds Water Technology) E-SH pump, Clear Blue multi-round bag housing, and Dixon butterfly valves. We mounted the equipment on a fabricated c-channel base plate with lifting lugs and grouting holes. The equipment connected to welded SCH40 carbon steel piping.

Read More »

Graco Quantum Pump on Cart

No compressed air? No problem! Check out this cost-saving cart-mounted Graco QUANTM i30 electric double diaphragm pump we provided to a custom film and adhesive developer. The assembly enables the company to pump chemicals in an area of the operation where compressed air is not available. Features of this pump cart include: • 1″ NPT […]

Read More »

Cornell Duplex Self-Priming Pump Station

Check out this handsome duplex self-priming pump station we put together for a good customer. The assembly features (2) Cornell Pumps with Redi-prime chambers. The skid also includes Proco expansion joints, Dixon butterfly valves, IFM pressure transducers and a control panel built at our Michigan branch. Anderson Process assesses your fluid application needs and collaborates […]

Read More »

Blackmer Pump Cart

Built for a chemical manufacturer, this sharp-looking pump cart features a Blackmer GNX3 Vane Pump coupled to 10 HP motor. The 10 HP motor was controlled off an explosion-proof motor starter box capable of reversing motor to conveniently be able to pump backwards. To protect the pump during reverse operation a Fulflo relief valve was […]

Read More »

Blackmer/TCS Metering Skid

Check out these metering skids we built for a chemical manufacturer to transfer flammable chemicals onto tankers. The skids consisted of a Blackmer Magnes pump coupled to a Nord gear reducer and WEG explosion-proof motor. The Blackmer Magnes pump pumped the chemicals through a TCS meter with an auto-shutoff. The pump was controlled with an […]

Read More »

Metering Skid

Designed for a mixer manufacturer, this metering skid was built by Anderson Process to meter different additive liquids to cement during the mixing process. The skid was constructed using (3) poly tanks, (1) Liquiflo gear pump, (2) Viking gear pumps and Dixon and Jomar actuated 3-way valves. Anderson Process not only designs and builds metering […]

Read More »

3″ Wilden Pump Stands

These Wilden Pro-Flo Shifts AODD pump stands were supplied to a chemical manufacturer for pumping a variety of different chemicals. The stands consisted of Wilden Pro-Flo Shift pump, IFC Y-Strainer, Wilden Pulsation Dampener (not pictured), Dixon air shut off valve, RTI air filter, coalescer, regulator, and (2) Hose Master Flex connectors (not pictured). The components […]

Read More »

Tuthill Duplex Pump Skid

Pictured is a duplex pump skid that was designed for pumping fuel oil at a hospital. The assembly consisted of (2) Tuthill gear pumps, Fulflo relief valves, Dixon valves and a Titan duplex basket strainer. All the components are mounted on a painted carbon steel base with spill containment and piped in carbon steel SCH40 […]

Read More »

Mouvex Metering Pump Skid

This Mouvex Metering Pump Skid was designed for a pharmaceutical manufacturer. Its primary function is metering water. The skid consists of a Mouvex SL4 Pump, A WEG 2HP Motor, A Micro Motion 2500 Series Meter, 30 AMP Disconnect Safety Switch, 480 Volt Panel, 24VDC Controls, Allen Bradley VFD, Stainless Steel Sanitary Fittings and Ashcroft Gauges. […]

Read More »

Spill Containment Platforms

Checkout these spill containment platforms we built for a well-known auto manufacturer. They are solidly built, made from 316 stainless steel and premier fiber grating. The platforms were being used to contain caustic media. Ball valves were added on the sides of the platforms to be able to release the spilled caustic media contents. A […]

Read More »

Glycol Batching Skid

Pictured is a skid designed to transfer batches of Glycol off rail cars and into tanker trucks. To achieve this, a Blackmer MS3 Magnes pump was coupled to a Nord gearbox and a WEG 10 HP explosion proof motor. This assembly pumped the Glycol through an Endress Hauser ProMass Coriolis flow meter to totalize the […]

Read More »

Tuthill/Hypro Oil Filter Skid

This oil filter skid was designed for an industrial refrigeration designer/builder contractor. The contractor wanted to be able to filter oil inline on ammonia compressors and ultimately chose a Tuthill L-Series gear pump to side stream the oil. It’s preferred to have a system that side streams the oil, rather than a system with the […]

Read More »

Water Tempering Skid

This water tempering skid was designed for an aerosol and bag on valve filling manufacturer. The manufacturer needed a way to heat up 194 gallons of batch water in their pressurized tank (able to fill 75 cans per minute), so they could test their product can’s integrity at 135 degrees Fahrenheit. The water tempering skid […]

Read More »

Cooling Skid System

Pictured below is a cooling skid designed for an orthopedic product manufacturer who makes artificial replacement parts for the human body. The customer needed a way to keep the air compressors and air dryer used in their production process from overheating. Our solution was a system that utilizes a cooling tower. The system recirculates cool […]

Read More »

Xylem Booster Pump Package

Extra features are nice to have, but at the end of the day it’s really about what gets the job done. Our customer was looking for a more economical booster pump system similar to larger booster pump packages without the non-essential features. Our solution (pictured below) is a practical, engineered assembly consisting of (2) Goulds […]

Read More »

Tuthill Paint Skid

This paint mixing and transfer skid was designed for a manufacturer of radiators that are used to cool large transformers. Our customer wanted to be able to efficiently mix paint and other chemicals to produce the protective outer coating that is applied on their radiators. Our engineered solution consisted of two Tuthill Global Gear pumps […]

Read More »

Blackmer Pump Cart For Adhesives

This mobile pump cart was designed for an adhesives manufacturer that needed to introduce additives and defoamer to an adhesive product. Due to systems already in place, the customer requested a mobile, turn-key solution that would offer minimal setup for integration. This assembly consisted of a Blackmer SX Series stainless steel vane pump coupled to […]

Read More »

Pulsafeeder Metering Skid

A Food & Beverage customer required a solution for low-flow, high-accuracy dosing of antioxidants into Canola Oil. This assembly consisted of a Pulsafeeder – Florida Blackline metering pump mounted on a painted carbons steel skid with associated stainless steel threaded suction and discharge piping. The suction and discharge piping included a y-strainer, pressure gauges, BLACOH […]

Read More »

Avocado Oil Removal – Wilden Pump Cart

One of our food production customers was paying $2,000 per week to have a third party pump out their used avocado oil, a byproduct of their production process.  The oil would collect in a 10’ pit and they did not have an in-house solution for removal.  Our team built them a mobile Wilden Pump Cart […]

Read More »

Gear Pump

Gear Pump Boosts Facility Chemical Totes

A customer was no longer able to buy their chemical supply in bulk, causing them to use smaller totes. This created an issue in transporting the chemical throughout their facility, as the totes had to be stored in a location far from their previous bulk storage tanks and existing pump system. Anderson Process designed a […]

Read More »

Rail Car Chemical Pump

Rail Car Chemical Transfer

Chemical transports are one of the largest revenue streams for railroads in the United States. In 2019 close to 972 million tons of chemicals were shipped throughout the country due to their use in a diverse production of other goods. When transferring chemicals via rail car or tanker truck, the average capacity will be around […]

Read More »

Acid Dosing Cart

These three unique pump carts are used to dose precise small amounts of acids. The semi-automated, mobile units provide a highly efficient production output necessary for the chemical industry. These units feature a ¼” Wilden Accu-Flo AODD pump, ½” Wilden pulsation dampener, Polytrace B2 Batch controller, RTI filter regulator, Dixon ball valve, and spill containment […]

Read More »

Custom Oil-Heating System

Here is a custom skid our team built for a customer that specializes in sustainable packaging.  The customer needed a way to control the temperature of oil in a tank for use in their manufacturing process.  To accomplish this, our team custom-engineered a skid using an assortment of fluid handling components from some of our […]

Read More »

Duplex Filter Cart

Our team recently built this custom cart for a customer that specializes in chemical handling and aerosol packaging.  This duplex filter system is being used to filter a bentonite clay/water mixture in multiple locations, so it was fabricated onto a mobile cart to allow easy transfer around the facility. The cart was assembled with FTI […]

Read More »

Custom Temperature Control Skid

We recently had a customer that needed to build a temperature control skid that used a Dean pump to pump Therminol out of a storage tank and send it though a heating or cooling heat exchanger to control the temperature of the oil by the uses of control valves. The heating heat exchanger was a […]

Read More »

Wilden Powder Pump Cart for Chemical Manufacturer

This custom pump skid was designed for a Food & Beverage Chemical Manufacturer.  On this project we modified a Wilden XPS15 Stainless steel FDA pump by adding a port to inject air on the underside of the inlet balls to keep them moving and allow the powder to work its way through the pump. The […]

Read More »

Adhesive Filtration Skid

One of our customers had the need to filter a viscous adhesive.  We built them a custom filter skid compromising of two FTI housings arranged is a duplex orientation.  The filters each have a pressure differential switch which allows the flow to be diverted once a filter gets too dirty to run. When the first […]

Read More »

Wilden Pump Skid

Is mobility, cleanliness or filtration the most important part of your process? Let us help you combine it all into one package. Here we built an all stainless steel portable cart using a Wilden 1.5” Saniflo Hygienic pump to pump a personal hygiene product from bulk totes through a Shelco MicroVantage filter to their filling […]

Read More »

Front Differential Gear Oil Fill System

We designed and built a front differential gear oil fill system for an automobile company. The system uses two 1/2″ Wilden aluminum pumps, Burkert air operated valves, Numatics regulators, safe lockout valves, Graco oil fill nozzle and a needle valve for flow control.

Read More »

Gas Skid Build

Our fabrication team in Michigan just finished up a gas skid for an automobile manufacturer. The skid is going to be used for an addition to an existing line to increase production. We designed the gas skid with Parker filters, Total Control Systems (TCS) meters, Morrison fire safe valves, Numatics regulators, Ross solenoid valves and […]

Read More »

Pumping/Dispensing Glue System

With our customers input, we helped finish designing and building a system that we just shipped off for startup and final alterations. This system is built for pumping/dispensing glue with built in flow sensors for supply and return, an Eaton automatic self-cleaning filter with pressure transducers on the inlet and discharge to sense pressure, a […]

Read More »

Heating Skid

We worked with a customer to develop a heating skid to keep their product (Mixture of RO Water and Dimethylformamide) temperatures in bulk storage tanks at the proper temperature. When they needed to transfer the product to the production line for use, it was already at the necessary temperature, filtered to specification and ready for […]

Read More »

Filtration Skid

This skid was designed with a T-Mag magnetic drive centrifugal sealless pump, WEG explosion proof motor, Pentair filters and housings and Dixon cam and groove fittings. Through this combination, the skid is now capable of pumping product through a 20 micron pre-filter and then the final .2 micron filter at 50 GPM. Every component was […]

Read More »

Metering Cart

Let us help you build a Metering cart for portability. This particular cart includes a Tuthill Stainless Steel meter with a mechanical read out and Dixon gauges and valves for control/shut off. It was completely custom made per the customer specifications.

Read More »

Xylem System

Customer: Metal Manufacturer Need/Application: Customer was looking to install new equipment to speed up their manufacturing. Solution: Built a Xylem system that could take 120°F of water and cool it to 90°F at 40 GPM. The system included the following: 2 pumps (duplex pump with VFD controls, pressure switches and alternator), control panel, differential pressure switch, heat exchanger, […]

Read More »

Mouvex System

Customer: Chemical Manufacturer Need/Application: Needed to pump chemicals from rail cars with the following requirements… Maximum of 20 ft. lift 80 GPM flow rate Working pressure of 60 PSI Solution: This was made possible by building a four skid unit equipped with a variety of products. This complex system included air actuated ball valves, Micro Motion meter, Mouvex pump, […]

Read More »

Ampco System

Customer: Food Manufacturer Need/Application: Customer wanted a heated mix tank with batch metering capabilities that would fit into their elevator and be fully portable. Solution: The system included: Ampco pump, Xylem multi-stage pump, control panel build to our specifications, air actuated three way valve, electric heater to heat the glycol/water mixture, jacketed tank, Micro Motion meter and a Sharpe […]

Read More »