Along with our partner Roto Ultra, we were able to meet a few special color and paint specs for a customer. This Ohio State University-inspired polymer metering pump was constructed out of stainless steel and using Viton elastomers. This particular pump was designed to pump polymer at around 2 gpm and 40 psi. A right-angle […]
We mounted an FTI (Filter Technology Incorporated) stainless steel filter housing on a stainless-steel fabricated cart. This allows the filter cart to be moved around the plant during the manufacturing of paint. The customer wanted the filter housing mounted on an angle to make changing the filter bags easier.
No compressed air? No problem! Check out this cost-saving cart-mounted Graco QUANTM i30 electric double diaphragm pump we provided to a custom film and adhesive developer. The assembly enables the company to pump chemicals in an area of the operation where compressed air is not available. Features of this pump cart include: • 1″ NPT […]
Anderson Process designs and builds custom skids and systems for fluid processing applications, which includes welding piping and sanitary tubing in-house. Check out this sanitary tubing we welded fittings on for a custom adhesive filtration skid we built. Welding sanitary tubing is a technical process that needs to have full penetration and purge gas flowing […]
These Blackmer Gear G1-133 pump assemblies were built for an adhesives manufacturer for processing PVA adhesives (poly vinyl alcohol). They are made of stainless steel and have 4” flanges. An addition we provided was a stainless-steel guard around the stuffing box at the customer’s request for extra protection. We also welded risers on our standard […]
This paint mixing and transfer skid was designed for a manufacturer of radiators that are used to cool large transformers. Our customer wanted to be able to efficiently mix paint and other chemicals to produce the protective outer coating that is applied on their radiators. Our engineered solution consisted of two Tuthill Global Gear pumps […]
One of our customers needed a solution to a 10-year-old mixing issue that was driving up operation costs in their facility. The process involves producing a water/polyvinyl acetate emulsion mix that is used as a bath for premoisturized fabric to be coated. The fabric coating requires an extremely consistent mix, and their existing equipment was […]
This mobile pump cart was designed for an adhesives manufacturer that needed to introduce additives and defoamer to an adhesive product. Due to systems already in place, the customer requested a mobile, turn-key solution that would offer minimal setup for integration. This assembly consisted of a Blackmer SX Series stainless steel vane pump coupled to […]
Resins are naturally occurring as a plant substance but are often made synthetically, converted into polymers to be used in numerous applications. When pumping certain resins the biggest factor to consider is their viscosity, as they can vary from a thin syrup to a solid substance. Resins can be difficult to handle as they can […]
We built a custom skid for a customer who needed to pump asphalt, a hot and aggressive material. Systems that handle these types of materials need to be able to handle unplanned disruptions in the system in regards to temperature and viscosity. Featured on this skid is a Blackmer 8” HXL sliding vane pump, a […]
One of our customers had the need to filter a viscous adhesive. We built them a custom filter skid compromising of two FTI housings arranged is a duplex orientation. The filters each have a pressure differential switch which allows the flow to be diverted once a filter gets too dirty to run. When the first […]
Increasing output and efficiency is a common goal for all manufacturers. Customers often come to Anderson Process looking for ways to improve their fluid handling applications. Our experienced Territory Managers are there every step of the way, from initial walk-throughs and recommendations to full implementation. Here’s another production improvement designed and coordinated by the AP […]
With our customers input, we helped finish designing and building a system that we just shipped off for startup and final alterations. This system is built for pumping/dispensing glue with built in flow sensors for supply and return, an Eaton automatic self-cleaning filter with pressure transducers on the inlet and discharge to sense pressure, a […]
