Contact Us Today! | (262) 784-3340

Knowledge & Insights: Tanks

Tank mounted level sensor bypass chambers

Tank-Mounted Level Sensor Bypass Chambers

We fabricated eight tank-mounted level sensor bypass chambers for a liquid-storage facility. They are made of SCH 80 carbon steel pipe (powder-coated for protection) and we mounted Endress+Hauser Levelflex level sensors to them. The bypass chambers are mounted via ANSI flanges on the side of a tank to allow users to read the liquid level […]

Read More »

Metering Skid

Designed for a mixer manufacturer, this metering skid was built by Anderson Process to meter different additive liquids to cement during the mixing process. The skid was constructed using (3) poly tanks, (1) Liquiflo gear pump, (2) Viking gear pumps and Dixon and Jomar actuated 3-way valves. Anderson Process not only designs and builds metering […]

Read More »

Spill Containment Platforms

Checkout these spill containment platforms we built for a well-known auto manufacturer. They are solidly built, made from 316 stainless steel and premier fiber grating. The platforms were being used to contain caustic media. Ball valves were added on the sides of the platforms to be able to release the spilled caustic media contents. A […]

Read More »

Cooling Skid System

Pictured below is a cooling skid designed for an orthopedic product manufacturer who makes artificial replacement parts for the human body. The customer needed a way to keep the air compressors and air dryer used in their production process from overheating. Our solution was a system that utilizes a cooling tower. The system recirculates cool […]

Read More »

Mixmor Mixer and Tank Assembly

This MixMor turbine mixer with mixing tank assembly was designed for a midwest chemical manufacturer. The manufacturer’s business was expanding, and they wanted a new mixer and tank to double their production rate. The assembly features a MixMor TC-20-L52 flange mounted turbine mixer with a TEFC Motor (20 HP, 1750 RPM, 3/60, 230/460 VOLT), gear […]

Read More »

Standard Pump Tote Batching System

This Standard Pump tote batching system was designed for a battery supplier, who was interested in a system to batch battery acid (sulfuric acid) out of a tote and into jugs. Pictured is the system we designed. A Standard stick pump was used for pumping the battery acid from the tote. A stainless steel bridge […]

Read More »

Tuthill Paint Skid

This paint mixing and transfer skid was designed for a manufacturer of radiators that are used to cool large transformers. Our customer wanted to be able to efficiently mix paint and other chemicals to produce the protective outer coating that is applied on their radiators. Our engineered solution consisted of two Tuthill Global Gear pumps […]

Read More »

Chlorine Tank Refurbishment

We are always willing to go the extra mile for our customers, even when the project is just for show.  One of our customers wanted to remodel the front entryway at their corporate headquarters.  They asked us to refurbish an old chlorine tank to be used as a display piece. We accomplished this project by […]

Read More »

Stainless-Steel Tanks

Our Michigan facility built several stainless-steel tanks to be used by an industrial laundry service company. They offer cleaning of tough, gritty materials such as oil absorbents, industrial towels, and floor mats that are used in various manufacturing facilities. They previously used polyethylene tanks in their facility to hold the materials used for their cleaning […]

Read More »

Custom Temperature Control Skid

We recently had a customer that needed to build a temperature control skid that used a Dean pump to pump Therminol out of a storage tank and send it though a heating or cooling heat exchanger to control the temperature of the oil by the uses of control valves. The heating heat exchanger was a […]

Read More »

Stainless Steel Storage Tanks with Mounted Mixers

Increasing output and efficiency is a common goal for all manufacturers. Customers often come to Anderson Process looking for ways to improve their fluid handling applications. Our experienced Territory Managers are there every step of the way, from initial walk-thoughs and recommendations to full implementation. Here’s another production improvement designed and coordinated by the AP […]

Read More »

Fluid Transport and Storage Solutions

Anderson Process has recently worked with another customer to solve their fluid transport and storage needs. Challenge: The customer was looking to move from drum and tote delivery of ethyl acetate to a centralized storage system. Solution: Anderson Process provided them with 2 outdoor 5,200 gallon double walled tanks and 2 indoor 500 gallon double […]

Read More »

Storage Tanks

We are more than a pump distributor. We work closely with customers to provide solutions to any fluid handling applications, extending well beyond standard pumps and hose. This customer needed increased storage capabilities for their operation and turned to Anderson Process for a solution. Challenge: Our customer needed to expand storage capabilities for increased production. […]

Read More »

Platform System

We recently finished and installed Phase 1 of an engineered, designed and built Stainless Steel platform system that will help assist in the manufacturing of product once completed for a local Food manufacturer. Phase 2 will consist of alterations to tanks and mixing equipment to improve the efficiency of food production. The platform system will […]

Read More »

Wilden System

Customer: Machine Manufacturer Need/Application: Needed to batch and mix coating material at two different strengths and supply it to their production lines. Solution: This was made possible through the design of a two tank system with Wilden pumps to pump product from totes into tanks and from tanks to production lines. All of the piping, pumps and valves […]

Read More »

Custom Engineered Tank System

This tank system filters the incoming product, and heats the oil to a set temperature.

Read More »