We recently had the opportunity to help a metal pipe manufacturer solve a wastewater challenge by upgrading their pump system. Their ETFE-lined mag-drive pumps were struggling with wastewater containing a mix of nitric acid, hydrofluoric acid, and metallic particulates, which caused premature failures. To overcome this issue, we installed the Vanton CHEM-GARD 6 x 4 […]
We recently partnered with a research and design company to deliver a comprehensive solution for their fluid handling needs. Our team provided them with: 2 Liquiflo H-Series Stainless Steel Gear Pumps that feature ¾” inlet and discharge with a max flow rate of 10.7 gpm and a discharge pressure of 225 psi. ABB Baldor 1 […]
Recently, a chemical manufacturer reached out to us for a robust, reliable pumping solution. Here’s what we delivered: Blackmer G1-32 Cast Iron Gear Pumps designed to handle demanding chemical applications, featuring steel internals and 2″ npt fittings on both inlet and discharge. Nord Gear Reducer paired with the pumps to ensure optimal performance and torque […]
We just packaged up three Cadman 3500 WB Irrigation Travellers, and they’re heading out to a local vegetable producer! These units are designed to deliver top-notch irrigation performance with: Hose Specifications: 3.5″ ID and 925′ long Flow Rate: 270 – 440 gpm (1022 – 1665 l/min) Input Pressure: 130 – 150 psi (9 – 10 […]
The Ansimag KM Series Sealless Mag Drive ETFE Lined Pump is ideal for the most corrosive or acidic applications in the chemical and steel industries. With 3 sizes available, the KM Series can produce flows up to 147 gpm and up to 140 feet of head. This close-coupled design allows for alignment-free installation, easy service and […]
When a customer approached us looking for a robust industrial solution for a portable tank transfer pump, we selected a Liquiflo Centry Series centrifugal pump to replace a competitor’s sanitary centrifugal pump. The Liquiflo Centry pump was built out of 316 stainless steel, featuring a 2″ inlet x 1.5″ discharge and powered by a 3-hp WEG […]
We are always fabricating unique carts and bases to meet customer needs. While many look alike, they are almost always different. We have standard-sized pump bases in various lengths in stock, but once we start building wider or longer, we often need to fabricate custom bases. This 40″ x 30″ base was the foundation for […]
Along with our partner Roto Ultra, we were able to meet a few special color and paint specs for a customer. This Ohio State University-inspired polymer metering pump was constructed out of stainless steel and using Viton elastomers. This particular pump was designed to pump polymer at around 2 gpm and 40 psi. A right-angle […]
We are in the process of building a tank-cleaning cart for a customer who needs to flush oil out of their tanks. The finished cart will include Gusher and Wilden pumps, but the system also needs a custom tank-cleaning lance which will have a spray ball attached to the end. We built the 16”-long tank-cleaning […]
We recently built these two Cornell Pump STX-Series self-primer pump skids for pumping wastewater at a food processing plant. The 6″ STX-Series pump is designed to pump 800 gpm at 25 feet of head while the larger 8″ STX-Series pump is designed for 1,200 gpm at 25 feet of head. Both pumps were fabricated using […]
Many of the filtration carts we build look similar, but each is tailored for its application. We recently built this one for a chemical manufacturer. While it may look like a cart we recently built for a paint manufacturer, there are many additional components. This cart was specifically designed to filter out particulate during the […]
For any rotating or reciprocating piece of equipment, the foundation is key to its longevity. Whether it is on a base or cart, securing the equipment helps prevent damage from unwanted movement and vibration. We secured this Ampco C-Series 3″ x 2″ stainless-steel pump, powered by a 20 hp WEG motor, to a double-bent carbon-steel […]
We built this unique cart for a Continental Pump progressive cavity pump out of carbon steel, which we painted with epoxy and mounted on 8″ rubber wheels. The pump is constructed of stainless steel, powered by a 2 hp WEG motor, with a Viton stator and coupled to a Nord Gearbox. It provides 20 gpm at 50 psi of slurry. Additional […]
We built this custom welding-cable hanger for a customer out of carbon steel, which we then powder coated for durability. These custom hangers are a great alternative to rope, wire or straps, which tend to be small in width, putting a lot of pressure on a single point of a hose or cable. Instead, our […]
A chemical manufacturing customer needed a solution for transferring chemicals within their facility, so we built this Blackmer SMVP Series sliding vane pump. The close-coupled mag-drive pump is made of stainless steel and powered by a WEG motor, mounted on a powder-coated steel double-bent base. We chose the Blackmer SMVP because the seal-less magnetic coupling provides […]
When it comes to repairs, we pride ourselves on using OEM replacement parts – but sometimes, that’s just not possible and we need to get creative to get the job done. Recently, we finished a repair job that required a new stuffing box. We could not source an OEM replacement in time, so our team […]
Clear liquid water-return pumps from Cornell are known for superior efficiency. We designed this one specifically for a food processing facility. The pump is built on an elevated stand, making the inlet level with the return tank. Clear liquid pumps from Cornell are available with a variety of mounting configurations, in sizes ranging from 1″ […]
Do you need custom fabrication work? We helped fabricate this custom Venturi out of 304 stainless steel per our customer’s drawing and specification. We can help build custom components or use standard part numbered components, which is what we did here. With the help of Dixon Valve and our many other suppliers, we can build a […]
This Wilden 3″ Brahma bolted air-operated double diaphragm flap valve pump is mounted onto a cart that is moved around a food manufacturer pumping waste oil from multiple sumps. The customer was worried that large chunks of potatoes or even nuts and bolts could end up in the sumps. We chose the Brahma pump because […]
We built this simple filtration hand cart to be moved around a power plant. The cart utilized a 20″ Shelco Filters filter housing and a Global Filter 1-micron meltblown cartridge filter. A 1″ Wilden aluminum air-operated double diaphragm pump pumps through the filter. We used a Continental Contitech Fabchem UHMW hose to connect the pump […]
These two Thomas Pump self-priming centrifugal pump skids were built for pumping wastewater out of sumps at a large device manufacturing facility. The larger 3″ T-PRIME self-priming pump is designed for 350 GPM and powered by a 20 HP WEG motor. The second pump is a 2″ T-PRIME self-priming pump designed for 50 GPM and […]
This custom portable air-operated double diaphragm pump cart was built for a food and packaging manufacturer. We mounted a Wilden Hygienic Series 1″ pump on a portable stainless steel cart that we fabricated. The cart includes a RTi-PBE filter regulator, Dixon Valve air shut-off valve, Tudertechnica Glidetech product hoses and a Continental Contitech air hose. […]
We fabricated eight tank-mounted level sensor bypass chambers for a liquid-storage facility. They are made of SCH 80 carbon steel pipe (powder-coated for protection) and we mounted Endress+Hauser Levelflex level sensors to them. The bypass chambers are mounted via ANSI flanges on the side of a tank to allow users to read the liquid level […]
We recently installed a new hose crimper at our Cleveland location. This enables us to hydrostatically test our hose assemblies in-house and offer on-site hydrostatic hose testing services. We wanted the ability to test hoses in-house and on-site to duplicate our other locations’ hose-manufacturing capabilities. Here we built a 500 PSI hydrostatic hose tester with […]
We built this portable cart with an AMT Pump Company 3″ self-priming pump, which is used to discharge water from a cook tank. The pump assembly was mounted on a stainless-steel fabricated cart and powered by a WEG motor and Variable Frequency Drive. Made for a meat processor, the cart will be moved around and […]
Made to pump carrots, this 4″ Cornell Pump Company food processing pump assembly is built on a custom stainless steel frame and is powered by a 7.5 HP Toshiba motor. The 4″ frame-mounted pump can pump up to 825 GPM. Not pictured: Hydro-Transport product tank that we built to help move product into the pump. […]
We built two custom filtration skids, each featuring two Wilden P200 AODD pumps, two FTI housings, two Orange Research differential pressure gauges, a Tudertechnica hose for vibration dampening, Dixon ball valves and a wall-mounted control panel built by our Michigan branch. The skids, which are used to filter an acid used in the pickling process, […]
During food processing, the product is often transferred and cleaned using water. It is common to see a Hydrosieve in the initial cleaning or water extraction phase of the process. Anderson Process helped design and build these all-stainless-steel units to help process peas. The wedge wire screen is 60″ wide, with .125″-wide slot openings. The product falls […]
We mounted an FTI (Filter Technology Incorporated) stainless steel filter housing on a stainless-steel fabricated cart. This allows the filter cart to be moved around the plant during the manufacturing of paint. The customer wanted the filter housing mounted on an angle to make changing the filter bags easier.
This is a unique railcar-to-truck unloading system with Benko Products Fall Protection. The trailer mount is portable and can be moved along uneven terrain, which makes it practical for this type of unloading. The Blackmer MAGNES Seal-less 3″ vane pump, powered by a WEG motor and driven by a NORD Gear Reducer, can fill methanol (120 […]
We built this pressure control skid featuring a Goulds Water Technology NPE pump, Aquavar variable speed pump controller, a HydroPro surge tank and Dixon Valve ball valves. Built to control and pump water at consistent pressure, the skid is mounted on painted carbon steel C-Channel base plate with lifting lugs and piped with SCH40 pipe.
We built this custom 50-gallon gasoline bowser for an automotive customer. The portable cart is powder-coated stainless steel with large rubber wheels to make portability easy. The bowser has two internal walls to minimize heat loss from hot gas to cold gas. This bowser has two Wilden Pro-Flo Shift 1/2″ AODD pumps, ContiTech Flexsteel gasoline […]
Here is a Blackmer G1-55 pump skid for pumping marshmallow fluff at a candy manufacturing facility. The stainless steel Blackmer gear pump has 2.5” ANSI flanges and is powered by a 5HP Weg washdown duty motor connected to a Sew-Eurodrive Gearbox. The Blackmer G1-55 pump has a nominal flow capacity of 90 GPM and 150 […]
Built to filter cooling water in a cooling tower basin, this filter skid features a Xylem (Goulds Water Technology) E-SH pump, Clear Blue multi-round bag housing, and Dixon butterfly valves. We mounted the equipment on a fabricated c-channel base plate with lifting lugs and grouting holes. The equipment connected to welded SCH40 carbon steel piping.
This compressor skid has a Mouvex Pump compressor coupled to a NORD gearbox driven by a Honda gas engine. The skid will mount on tanker trailers to compress the tanker and push the product off the trailer. Normally these compressors are mounted on the trucks and PTO driven, but mounting them on the trailer provides […]
This is one of many Ampco Pumps AL Series pump skids we supplied for a customer that pumps food grade oil at a processing facility. Notice the custom inlet and discharge extensions, which meet the customer’s specifications, and an Ampco Stainless Steel Lobe pump with NORD Helical Inline Gear Motor (painted white). The components are […]
We built multiple sprinkler stands that will be used at a loading/unloading terminal that handles a multitude of different materials (limestone, taconite, etc.). The stands will be used with Nelson Irrigation Corporation Big Gun sprinklers, which will deliver 350 GPM in a 400’ diameter circle – or partial circle, if needed. The application will also […]
No compressed air? No problem! Check out this cost-saving cart-mounted Graco QUANTM i30 electric double diaphragm pump we provided to a custom film and adhesive developer. The assembly enables the company to pump chemicals in an area of the operation where compressed air is not available. Features of this pump cart include: • 1″ NPT […]
This filter skid featured a Xylem (Goulds Water Technology) NPE pump, FTI filter housing using AJR high-capacity oil absorbing micro-fiber filter media, and Dixon ball valves. Made for a Truck Accessory Manufacturer, we mounted the pump and filter on a stainless-steel double bend base and connected the two using welded SCH40 stainless steel piping. The […]
