Along with our partner Roto Ultra, we were able to meet a few special color and paint specs for a customer. This Ohio State University-inspired polymer metering pump was constructed out of stainless steel and using Viton elastomers. This particular pump was designed to pump polymer at around 2 gpm and 40 psi. A right-angle […]
We are in the process of building a tank-cleaning cart for a customer who needs to flush oil out of their tanks. The finished cart will include Gusher and Wilden pumps, but the system also needs a custom tank-cleaning lance which will have a spray ball attached to the end. We built the 16”-long tank-cleaning […]
We recently built these two Cornell Pump STX-Series self-primer pump skids for pumping wastewater at a food processing plant. The 6″ STX-Series pump is designed to pump 800 gpm at 25 feet of head while the larger 8″ STX-Series pump is designed for 1,200 gpm at 25 feet of head. Both pumps were fabricated using […]
Many of the filtration carts we build look similar, but each is tailored for its application. We recently built this one for a chemical manufacturer. While it may look like a cart we recently built for a paint manufacturer, there are many additional components. This cart was specifically designed to filter out particulate during the […]
