Since founded in 1924, Tsurumi Pumps has manufactured pumps using only the most durable components and have featured patented, cutting-edge technology making them one of the most reliable, Tsurumi trustworthy pumps on the market. The combination of these factors has led to remarkable successes in many fields, including construction, civil engineering, mining, industrial wastewater, domestic wastewater, sewage treatment, flood remediation, and more.
Single Phase Submersible Pumps
Tsurumi Pumps produces top of the line submersible pumps for the construction and rental market, outlasting the competition in pump life, product offering and cost savings.
HS SERIES
Submersible, durable, trash pump designed for water, wastewater and light slurry pumping. Available in two sizes, a 1HP & 3-inch discharge and a 1/2HP & 2-inch discharge. Good for residential, commercial, industrial & construction dewatering applications.
LB SERIES
Rugged dewatering pumps built to fit into 8″ pipes in 2/3HP, 1HP, and 2HP. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low levels and extended dry-run capacity.
LSC SERIES
Original residue dewatering pump; able to pump down to the floor, even the smallest wet spots can be pumped dry. LSC drainage pump is the best for complete drainage of flat surfaces where a sump is not available.
LSR SERIES
Low level high volume residue pump capable of pumping down to 1/4 inches. Pump holds suction for drainage to 0.4 inch water level.
NK SERIES
Contractor pumps for high volume single phase dewatering applications. Heavy duty, high head single-phase pumps available in 110v or 220v. Optional agitator kits allow continuous duty when pumping abrasive materials.
UTILITY SERIES
Lightweight pumps suitable for all general dewatering needs.
UT/UTZ SERIES
The UT pump is a compact economical cast iron pump, which has a large passage that makes it ideal for liquid containing various solids.
Three Phase Submersible Pumps
Tsurumi Pumps 3-Phase Pumps are loaded top to bottom with features to withstand the toughest dewatering applications. Features such as:
• Easily converted between high pressure and high volume configurations
• High Pressure Rated Mechanical Seals
• Rugged Iron Construction
• Anti-Wicking Cable Entrance
• Dual Silicon Carbide Mechanical Seals
• Oil Lifter
• Internal Thermal Motor Protection
• Automatic Operation on KTZE Series
LBT SERIES
Rugged dewatering pumps built to fit into 8″ pipes in 1HP and 2HP. Top discharge provides maximum motor cooling while allowing continuous duty operation. Pumps fit into 8-inch pipes.
KTZ/KTZE SERIES
KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering. Versatility is increased as each pump model has the capability of easily converting between high head and high volume performance with a simple change of the impeller and wear plate.
LH SERIES
Tsurumi’s LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods. Complete with a high chromium semi-open impeller and adjustable wear rings, the LH pumps provides increased wear resistance whether your application is effluent transfer, construction site drainage, or commercial/industrial dewatering.
LHW SERIES
Tsurumi’s LHW series achieves extremely high head capabilities. The dual staged enclosed impellers are just one of many features found engineered into these durable pumps that can solve all long distance water transfer needs.
Engine Driven Pumps
EPT SERIES
Tsurumi EPT Series engine driven trash pumps are designed with oversized pump casing, and a cleanout door which can be removed from the pup casing without having to remove the suction hose. Powered by heavy-duty, powerful Honda GX Gas engines.
TE SERIES
Tsurumi TE Series engine driven centrifugal pumps are powerful, lightweight pumps. Powered by heavy-duty Honda GX Gas engines.
TD SERIES
Diaphragm pumps for sand, sludge, and mud applications.
THP SERIES
High pressure engine powered pump for sprinkling, irrigation, and fire protection. Powered by heavy-duty Honda GX Gas engine.
Generators
TPG SERIES
TPG-series generators are designed to withstand the severe conditions of construction jobsites or industrial applications, especially where extra durability and dependable, stable power are required. Perfect for supplying power to Tsurumi’s single-phase submersible pumps and all your electrical power tools such as drills, saws, lighting and heaters. All units are powered exclusively by Honda and meet all EPA evaporative emission regulations and OSHA job-site standards.
Sewage Pumps
C SERIES
Tsurumi C Series Cutter Pump™ is a solids handling, non-clog submersible pump with a unique tungsten carbide tipped single or multi-vane impeller and high chrome serrated wear plate for shredding of solids. Municipal, industrial and commercial applications. 1 to 30HP, Single phase and three phase available.
B SERIES
Tsurumi B Series non-clog pumps are used primarily in municipal water supply stations and sewage treatment plants for pumping water, sewage, and digested sludge. In industry, these pumps are efficient for controlling cooling water, process and wastewater, and abrasive materials. Multiple impeller types for maximum flexibility. 2″-8″ discharge size.
BK SERIES
Featuring a standard built internal cooling jacket design, the BK series offers continued cooling when low sump level may be present. Solids handling non-clog submersible pump featuring a standard cooling jacket for operating at low water levels without overheating. 30HP – 50HP, three phase. 6″-12″ discharge sizes.
BZ SERIES
Tsurumi BZ Series pumps are designed and built for sound quality and continuous run. Systems whether for wastewater drainage, pumping or flood control run stably with the BZ Series and maintenance costs are greatly reduced. As an option, the pumps can be adapted for seawater, high temperature liquids or other special application, paving the way for their use at shipyards and power plants for water intake and discharge.
MG SERIES
Foreign matter is finely ground up by the built-in grinder mechanism and discharged by a vortex impeller. Tsurumi submersible grinder pumps utilize a grinding mechanism in the suction port to crush foreign matter into fine particles before discharging the waste.
U SERIES
Tsurumi’s U-Series pumps provide exceptional capabilities for those small to mid-range applications in which solids and stringy materials can be problematic.
PU SERIES
The PU Series pumps are submersible solids handling pumps designed with semi-vortex type impeller for passing solids and stringy materials in residential, commercial and industrial sewage and site drainage. Available in single-phase, 1/5-1HP, 115V, 230V, and three-phase 1/3-5HP, 208-220V, 460V, and 575V. Corrosive resistant materials of construction. Automatic (A) and Auto-Alternating (W) versions are available in all sizes.
UT/UTZ SERIES
The UT pump is a compact economical cast iron pump, which has a large passage that makes it perfect for liquid containing various solids.
UZ SERIES
Features a vortex impeller and wide pump casing interior, effectively pumping and discharging water containing solids and fibrous foreign matters.
MQ Series Explosion Proof Sewage Pumps
The AVANT™ Explosion Proof Submersible Pump features an FM approved design, premium IE3 motors, and closed loop cooling jackets. They have been designed to operate over a wide range of conditions; with multiple options for impellers, motors and mounting configurations.
Wastewater Process Equipment
BER SERIES
Submersible aspirating aerators range in size in 1-7.5HP, and single phase/three phase available. The BER is designed for high level oxygen transfer and outstanding mixing. The BER best application is used in Sequence Batch Reactors were high oxygen transfer is required during the aeration cycle and when the air is shut off, mixing only during the anoxic cycle.
FHP SERIES
SBR and Digester decanting pump is equipped with a suspended solids sensor that allows the decanter pump to operate independently. When the suspended solids rise above the set value, the sensor will activate shutting down the decanter, ensuring that only supernatant water is discharged without any entrapment of sediment.
FSP SERIES
The one of a kind FSP scum skimmer removes floating oils and grease solids. The scum skimmings are then pumped to collection tanks for processing.
KE/KS KW/KM SERIES
Mechanically cleaned bar screens; designed for the small plant inflows to remove solids from the wastewater, eliminating solids from aeration & clarification tanks. Screen capacity range from 5 GPM to 440 GPM. Bar spacing range from 1mm to 50mm. Screen is fabricate in 304 stainless steel material.
JD SERIES
JD Series is a innovative multi-disc dehydrator that consists of both resin and stainless steel discs and is free from clogging.
MR SERIES
The MR/MRL Series are effective towards preventing the sedimentation of solids and equalizing water quality in flow rate regulating tanks and intermediate flow rate regulating tanks that do not need air (oxygen).
TRN SERIES
Self aspirating designed impeller creates a venturi which draws air from above the surface of the water and mixing oxygen with the water while providing excellent stirring action.
Single Phase Submersible Pumps
Tsurumi Pumps produces top of the line submersible pumps for the construction and rental market, outlasting the competition in pump life, product offering and cost savings.
HS SERIES
Submersible, durable, trash pump designed for water, wastewater and light slurry pumping. Available in two sizes, a 1HP & 3-inch discharge and a 1/2HP & 2-inch discharge. Good for residential, commercial, industrial & construction dewatering applications.
LB SERIES
Rugged dewatering pumps built to fit into 8″ pipes in 2/3HP, 1HP, and 2HP. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low levels and extended dry-run capacity.
LSC SERIES
Original residue dewatering pump; able to pump down to the floor, even the smallest wet spots can be pumped dry. LSC drainage pump is the best for complete drainage of flat surfaces where a sump is not available.
LSR SERIES
Low level high volume residue pump capable of pumping down to 1/4 inches. Pump holds suction for drainage to 0.4 inch water level.
NK SERIES
Contractor pumps for high volume single phase dewatering applications. Heavy duty, high head single-phase pumps available in 110v or 220v. Optional agitator kits allow continuous duty when pumping abrasive materials.
UTILITY SERIES
Lightweight pumps suitable for all general dewatering needs.
UT/UTZ SERIES
The UT pump is a compact economical cast iron pump, which has a large passage that makes it ideal for liquid containing various solids.
Request a Quote
Download Three Phase Dewatering Pump Brochure
Three Phase Submersible Pumps
Tsurumi Pumps 3-Phase Pumps are loaded top to bottom with features to withstand the toughest dewatering applications. Features such as:
• Easily converted between high pressure and high volume configurations
• High Pressure Rated Mechanical Seals
• Rugged Iron Construction
• Anti-Wicking Cable Entrance
• Dual Silicon Carbide Mechanical Seals
• Oil Lifter
• Internal Thermal Motor Protection
• Automatic Operation on KTZE Series
LBT SERIES
Rugged dewatering pumps built to fit into 8″ pipes in 1HP and 2HP. Top discharge provides maximum motor cooling while allowing continuous duty operation. Pumps fit into 8-inch pipes.
KTZ/KTZE SERIES
KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering. Versatility is increased as each pump model has the capability of easily converting between high head and high volume performance with a simple change of the impeller and wear plate.
LH SERIES
Tsurumi’s LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods. Complete with a high chromium semi-open impeller and adjustable wear rings, the LH pumps provides increased wear resistance whether your application is effluent transfer, construction site drainage, or commercial/industrial dewatering.
LHW SERIES
Tsurumi’s LHW series achieves extremely high head capabilities. The dual staged enclosed impellers are just one of many features found engineered into these durable pumps that can solve all long distance water transfer needs.
Request a Quote
Download Three Phase Submersible Pump Brochure
Engine Driven Pumps
EPT SERIES
Tsurumi EPT Series engine driven trash pumps are designed with oversized pump casing, and a cleanout door which can be removed from the pup casing without having to remove the suction hose. Powered by heavy-duty, powerful Honda GX Gas engines.
TE SERIES
Tsurumi TE Series engine driven centrifugal pumps are powerful, lightweight pumps. Powered by heavy-duty Honda GX Gas engines.
TD SERIES
Diaphragm pumps for sand, sludge, and mud applications.
THP SERIES
High pressure engine powered pump for sprinkling, irrigation, and fire protection. Powered by heavy-duty Honda GX Gas engine.
Generators
TPG SERIES
TPG-series generators are designed to withstand the severe conditions of construction jobsites or industrial applications, especially where extra durability and dependable, stable power are required. Perfect for supplying power to Tsurumi’s single-phase submersible pumps and all your electrical power tools such as drills, saws, lighting and heaters. All units are powered exclusively by Honda and meet all EPA evaporative emission regulations and OSHA job-site standards.
Sewage Pumps
C SERIES
Tsurumi C Series Cutter Pump™ is a solids handling, non-clog submersible pump with a unique tungsten carbide tipped single or multi-vane impeller and high chrome serrated wear plate for shredding of solids. Municipal, industrial and commercial applications. 1 to 30HP, Single phase and three phase available.
B SERIES
Tsurumi B Series non-clog pumps are used primarily in municipal water supply stations and sewage treatment plants for pumping water, sewage, and digested sludge. In industry, these pumps are efficient for controlling cooling water, process and wastewater, and abrasive materials. Multiple impeller types for maximum flexibility. 2″-8″ discharge size.
BK SERIES
Featuring a standard built internal cooling jacket design, the BK series offers continued cooling when low sump level may be present. Solids handling non-clog submersible pump featuring a standard cooling jacket for operating at low water levels without overheating. 30HP – 50HP, three phase. 6″-12″ discharge sizes.
BZ SERIES
Tsurumi BZ Series pumps are designed and built for sound quality and continuous run. Systems whether for wastewater drainage, pumping or flood control run stably with the BZ Series and maintenance costs are greatly reduced. As an option, the pumps can be adapted for seawater, high temperature liquids or other special application, paving the way for their use at shipyards and power plants for water intake and discharge.
MG SERIES
Foreign matter is finely ground up by the built-in grinder mechanism and discharged by a vortex impeller. Tsurumi submersible grinder pumps utilize a grinding mechanism in the suction port to crush foreign matter into fine particles before discharging the waste.
U SERIES
Tsurumi’s U-Series pumps provide exceptional capabilities for those small to mid-range applications in which solids and stringy materials can be problematic.
PU SERIES
The PU Series pumps are submersible solids handling pumps designed with semi-vortex type impeller for passing solids and stringy materials in residential, commercial and industrial sewage and site drainage. Available in single-phase, 1/5-1HP, 115V, 230V, and three-phase 1/3-5HP, 208-220V, 460V, and 575V. Corrosive resistant materials of construction. Automatic (A) and Auto-Alternating (W) versions are available in all sizes.
UT/UTZ SERIES
The UT pump is a compact economical cast iron pump, which has a large passage that makes it perfect for liquid containing various solids.
UZ SERIES
Features a vortex impeller and wide pump casing interior, effectively pumping and discharging water containing solids and fibrous foreign matters.
Request a Quote
Download Sewage and Wastewater Pumps Brochure
MQ Series Explosion Proof Sewage Pumps
The AVANT™ Explosion Proof Submersible Pump features an FM approved design, premium IE3 motors, and closed loop cooling jackets. They have been designed to operate over a wide range of conditions; with multiple options for impellers, motors and mounting configurations.
Wastewater Process Equipment
BER SERIES
Submersible aspirating aerators range in size in 1-7.5HP, and single phase/three phase available. The BER is designed for high level oxygen transfer and outstanding mixing. The BER best application is used in Sequence Batch Reactors were high oxygen transfer is required during the aeration cycle and when the air is shut off, mixing only during the anoxic cycle.
FHP SERIES
SBR and Digester decanting pump is equipped with a suspended solids sensor that allows the decanter pump to operate independently. When the suspended solids rise above the set value, the sensor will activate shutting down the decanter, ensuring that only supernatant water is discharged without any entrapment of sediment.
FSP SERIES
The one of a kind FSP scum skimmer removes floating oils and grease solids. The scum skimmings are then pumped to collection tanks for processing.
KE/KS KW/KM SERIES
Mechanically cleaned bar screens; designed for the small plant inflows to remove solids from the wastewater, eliminating solids from aeration & clarification tanks. Screen capacity range from 5 GPM to 440 GPM. Bar spacing range from 1mm to 50mm. Screen is fabricate in 304 stainless steel material.
JD SERIES
JD Series is a innovative multi-disc dehydrator that consists of both resin and stainless steel discs and is free from clogging.
MR SERIES
The MR/MRL Series are effective towards preventing the sedimentation of solids and equalizing water quality in flow rate regulating tanks and intermediate flow rate regulating tanks that do not need air (oxygen).
TRN SERIES
Self aspirating designed impeller creates a venturi which draws air from above the surface of the water and mixing oxygen with the water while providing excellent stirring action.
Request a Quote
Download Watewater Process Equipment Brochure
Download MDQ MDC JD Series Dehydrators Catalog
Download MR Series Catalog