Crane Pumps & Systems

Barnes Pumps

Sithe Chopper Pumps: Solve clogging with chopping technology that slices even the most troublesome solids in waste water.

Razor Grinder Pumps: Ideal 2 HP pump for light commercial and residential solids handling applications.

SH Non-Clog Pump: Applications involving sewage, effluent, wastewater processing and solids laden media.

Blade Grinder Pumps: Suitable for high head high flow waste water grinding applications in municipal, commercial and light industrial environments. Available in 3HP to 15HP standard and explosion proof models with 2”, 2.5”, and 3” discharge sizes.

EcoTRAN Low-Pressure Sewer System: preserves groundwater ecology by collecting and grinding residential sewage in an enclosed underground basin system and transmitting the waste under pressure to a remote private or municipal waste treatment plant.

Upgrade Core – Replacement Grinder Pump:  Ideal 2 HP pump for light commercial and residential solids handling applications.

Packaged Systems: Designed to handle wastes from lavatories, laundry tubs, floor drains, water closets, etc. and will push the water from below ground up to where normal drainage will handle it.

Fountain Pumps: Available in Bronze and stainless steel construction, 1/3 to 1 HP units available in both 115V and 230V single phase for decorative water applications.

SGV/XSGV Grinder Pumps: Provide broad design flexibility with a choice of basin configurations

PGPH/PGPP Grinder Pumps: Designed to reduce sewage particles to a finely ground slurry.

Sewage Ejectors: Available in 1.5″,2″ & 3″ discharge, for residential and light commercial wastewater applications

Effluent Pumps: Designed for handling dirty water in typical septic tank / effluent applications.

Barnes SHUR-Switch Sump Pumps: Feature dual ball bearing design and thermoplastic impellers as well as innovative magnetic vertical float switch under a protective cover to prevent hang-ups.

HCU Series: Heavy-duty, general purpose centrifugal pumps with heavy wall castings suitable for industrial and marine applications. Applications include condenser, gear cooling, general water circulation, fire fighting, and washdown.

Omni Grind Plus Grinder Pumps: High head capabilities of a progressive cavity pump and the long life of Barnes centrifugal grinder pumps.

Transfer Pump Series: Designed to handle a wide variety of pumping applications. Barnes Transfer pumps are constructed of durable materials and include a garden hose attachment for convenient use.

Submersible Solids Handling Pumps (SE Series): Commonly found in applications involving sewage, effluent, wastewater processing and solids laden media.

ICU & CCE Self-Priming Pumps: Designed to meet a broad range of general and special industrial applications. Base mounted pump models are available with motors up to 150 hp, while closed-coupled pump models are available from 3 to 25 hp.

OGV Grinder Pumps: Designed to reduce sewage particles to a finely ground slurry.

PGPT Grinder Pump: Designed to reduce domestic sewage to finely ground slurry using exclusive Slicerator™ cutting system.

Burks Pumps

Regenerative Turbine Pumps: Engineered for high pressure, low flow applications. The raceway conducts fluid into the impeller and then provides a channel for the liquid to move as it is propelled and energized by the impeller.

Vertical Inline Pumps: For lower volume applications requiring flows up to 80 GPM. Can be installed in any position; horizontal, vertical or on an angle.

Condensate Return Systems:  Designed for automatic return of hot water condensation from radiators, coils, etc. to low and high pressure boilers, or for return of water and other liquids to the overhead tanks of industrial gravity circulating systems

Crown Pumps

Self Priming Solids Handling Pumps: Engineered self-priming centrifugal pumps for a variety of light to heavy-duty wastewater applications. Designed specifically for unscreened raw sewage or industrial waste applications.

Self-Priming Pumps (B-Models): Designed to meet a broad range of general and special industrial applications. Base mounted pump models are available with motors up to 150 hp, while closed-coupled pump models are available from 1/3 to 15 hp.

Deming Pumps

Demersible Industrial Chopper Pumps: Designed to solve clogging for the most troublesome solids in waste water. Available with either oil-filled submersible motors OR Premium Efficient air-filled envie3 motors.

Demersible Solids Handling: Engineered for industrial wastewater applications involving solids laden media. Available with either oil-filled submersible motors OR Premium Efficient air filled envie3 motors.

NSF 61/372 Pumps: Meet the industry’s highest standards for drinking water and comply with the federally mandated Safe Drinking Water Act (SDWA). Single-stage split case pumps are available in standard sleeveless design and optional sleeved design.

Series 5060 Split Case: Horizontal split-case single stage, general purpose split case pumps are designed for continuous service handling of both hot and cold fluids.

Vertical Process Pumps: Designed as space-saving units, always primed, with cantilever shaft, no submerged bearings, and broad capacity range.

Non-Clog Pumps (Dry Pit): Horizontal and vertical dry pit pumps are compact in design to meet a wide range of service conditions. Available in 25 size configurations.

End Suction Pumps (Frame Mounted/ Close Coupled): General purpose centrifugal pumps with heavy wall castings suitable for many commercial, industrial and municipal needs. Applications include condenser, chilled, and hot water systems in HVAC, process secondary pumping, and municipal drinking water.

End Suction ANSI Process Pumps: Centrifugal pump meets B75.1 mounting specifications. Heavy-duty service for liquids such as water and light hydrocarbons. 14 sizes available with high temperature ranges to 600 degrees Fahrenheit.

Inline ANSI Pumps: Back pull-out design which allows versatile applications in a wide range of industries. Available in 11 size configurations.

Column & Non- Clog Sump Pumps: Non- Clog Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes.

Prosser Pumps

Dewatering Pumps: Portable electric submersible dewatering pumps are designed for the removal of unwanted water. The slim design allows the pump to fit where other pumps can’t, including dewatering wells.

Weinman Pumps

End Suction Pumps: Heavy-duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial, industrial and municipal needs. Applications include condenser, chilled, and hot water systems in HVAC, process secondary pumping, and municipal drinking water.

CV Series: For high volume applications requiring flows up to 1,400 GPM. Suction and discharge nozzles are located 180° apart on the same centerline for mounting directly in a pipe line.

L/ LVM / JD Split Case: Split case are rugged and reliable, they combine mechanical simplicity with sophisticated hydraulic design.

TD Valves: A combination pump discharge valve which functions as a shut-off, check and calibrated flow balancer. Available in sizes 2″ through 12″ with ductile iron body.

NSF 61/ 372 Pumps: Split Case and single stage split case pumps that meet the industry’s highest standards for drinking water and comply with the federally mandated Safe Drinking Water Act (SDWA). The NSF are sophisticated hydraulic design, extensive hydraulic coverage, high efficiencies and rugged construction.