Contact Us Today! | (262) 784-3340

Mouvex Transfer Cart

We have built a few of these carts over the years for a local Chemical manufacturer, this one that we just shipped out was no different.  The pump assembly is used to transfer and recirculate an Aluminum / Solvent Slurry through a mill to reduce particle size.  This pump was built on a cart so […]

Read More »

blank

T-Mag Pumps AMX Series Pumps – Aluminum Anodizing

We just shipped out some additional AMX Series pumps to an Aluminum Anodizing operation.  These pumps are being used on the anodizing line for recirculating various bath / dip tanks full of various chemicals.  Depending on the arrangement, the pumps could be piped in directly to the tank feeding various spray nozzles or jets, or […]

Read More »

blank

Wilden Pump / Reelcraft Hose Reel Cart

We recently built two custom pump carts for a local customer that manufacturers cleaning and sanitation chemicals.  They wanted to minimize the amount of pumps needed and create a flexible solution for transferring chemicals from totes to a mixing tank to be blended for their customer’s specific needs.  The pump carts needed to have a […]

Read More »

blank

Sundyne LMV Pump Repair

We just finished a complete overhaul of a Sundyne LMV 811 API pump for a local Wisconsin Power Plant. Commonly found for pumping boiler feed water, condensate services or desuperheating, these pumps are key to keeping power plants up and running for power production. We did a complete rebuild of this pump, including a gearbox […]

Read More »

blank

Self-Priming Pioneer Pump De-watering Skid

Several years ago the Anderson Process team custom engineered a pump skid for a gravel pit customer moving large amounts of aggregate.  The pump consisted of a large Pioneer GS8 Pump Assembly designed for pumping water 2,000 GPM at 60 Feet of head. The self-priming, solids handling, centrifugal pump was put on a fabricated steel […]

Read More »

blank

Custom Temperature Control Skid

We recently had a customer that needed to build a temperature control skid that used a Dean pump to pump Therminol out of a storage tank and send it though a heating or cooling heat exchanger to control the temperature of the oil by the uses of control valves. The heating heat exchanger was a […]

Read More »

blank

Wilden Powder Pump Cart for Chemical Manufacturer

This custom pump skid was designed for a Food & Beverage Chemical Manufacturer.  On this project we modified a Wilden XPS15 Stainless steel FDA pump by adding a port to inject air on the underside of the inlet balls to keep them moving and allow the powder to work its way through the pump. The […]

Read More »

blank

Mouvex Pumps Moving Chocolate

Here are some pumps that were built for a food production facility, they are using Mouvex Eccentric Disc Pump assemblies for pumping Chocolate and Flavorings.  The order consisted of 8 pumps total, ranging from an Mouvex’s largest SLS Series pump, the SLS36 that is designed for up to 158 GPM, down to their model SLS12, […]

Read More »

blank

Adhesive Filtration Skid

One of our customers had the need to filter a viscous adhesive.  We built them a custom filter skid compromising of two FTI housings arranged is a duplex orientation.  The filters each have a pressure differential switch which allows the flow to be diverted once a filter gets too dirty to run. When the first […]

Read More »

blank

Re-finishing Benches for Municipality

Our repair capabilities extend beyond equipment designated for fluid transfer.  After a municipality in Michigan purchased a small pump from Anderson Process, they inquired about our ability to re-finish a number of other items for them – including staircase railings, ladders, lamp posts, and park benches.  Our in-house sandblasting and powder-coating capabilities made it easy […]

Read More »

blank

Viking Asphalt Pump Repair

The Anderson Process Repair Team is capable of handling equipment in any condition. This Viking asphalt pump was delivered in rough shape. Our team performed a range of repairs including a new bracket bushing, idler gear & bushing, packing, gaskets, elastomers, bearing, and bearing retaining hardware. It was sandblasted, repainted, and now looking and operating […]

Read More »

blank

What is a Mag Drive Pump?

Magnetic Drive Pumps Mag Drive pumps are seal-less pumps that use the technology of a drive magnet and inner magnet connected to an impeller to move fluid through the pump. The drive magnet and inner magnet are separated by a rear casing or housing, creating a seal-less containment. A Mag Drive Pump will prevent the […]

Read More »

blank

The Importance of Regular Maintenance on Your Pumps

One of our customers noticed the fluid end seals on their CAT high pressure pump were leaking, but decided to keep the pump running in order to get the job done.  They did not notice the internal severity of the seal leak, and without a proper maintenance schedule the seals were never changed.  The end […]

Read More »

blank

Modified Gould e-SV Pumps

Anderson Process provides unrivaled support to the industries we serve. One of our customers came to us recently for help installing custom vent lines on their Goulds e-SV pump carts. They had been buying the modified pumps from a competitor, but were not happy with the support they were receiving. Our team was happy to […]

Read More »

blank

Finding New Uses for Continental Fortress Hose

Finding New Uses for the Continental Fortress Hose!   One of our long-time farming customers has used Continental Fortress washdown hose’s for years. The durability and abrasion-resistant cover had been a perfect fit for the harsh environment of farming applications, and the working pressure and chemical compatibility was more than enough to meet their washdown […]

Read More »

blank

Reverse Engineering Hose Assemblies

Anderson Process supplies a gearbox re-manufacturing customer with new hose kits for a range of gearbox models. The re-builds usually consist of standard hose and components from our stock or easily sourced, but one of our last jobs for this customer presented a unique challenge. The gearboxes they were working on were manufactured in Europe […]

Read More »

blank

3 Advantages of AODD Pumps

Safety, Simplicity, and Versatility.  These are three terms that go hand-in-hand with Air-Operated Double-Diaphragm (AODD) Pumps.  While no single pump type can be perfect for all applications, AODD pumps can cover a wide spectrum of applications and materials. Air-Operated Double-Diaphragm (AODD) pumps are a type of positive displacement pump that utilizes compressed air for a […]

Read More »

blank

Preventative Maintenance

Business is slow for many, but that doesn’t mean you can’t remain productive.  If you have equipment sitting idle due to partial shutdowns, now might be a good time to perform preventative maintenance to ensure they perform as needed when full production returns.  Small investments now can help you avoid significant damage on pumps and […]

Read More »

blank

Custom Filter Carts

Custom carts and skids are one of our main areas of expertise.  Often times, multiple permanent filtering solutions are not a financial or efficient reality for our customers.  As a solution, mobile carts can be kitted with the proper equipment and used in multiple locations depending on which system has the need at any given […]

Read More »

blank

Stainless Steel Storage Tanks with Mounted Mixers

Increasing output and efficiency is a common goal for all manufacturers. Customers often come to Anderson Process looking for ways to improve their fluid handling applications. Our experienced Territory Managers are there every step of the way, from initial walk-thoughs and recommendations to full implementation. Here’s another production improvement designed and coordinated by the AP […]

Read More »

blank

Hose Audit & Testing Program

We’ve tested over 10,000 hoses in dozens of manufacturing facilities. The average failure rate of the hoses we test is 18%. That’s a lot of unwanted opportunity for safety issues, downtime, and inefficiencies in your process. Proper hose specification and maintenance are essential to consistent production output, efficient long-term fluid management and a safe and […]

Read More »

blank

Looking Back – Anderson Process and Blackmer Collaborate to Deliver Blackmer GX Series Pumps

In 2014, EMCO opened a new large-scale terminal facility that needed efficient, low-maintenance pumps. Because of the critical nature of these storage areas, it was imperative for EMCO to identify the right brand and style of pump that would be used to unload railcars of raw materials and load totes, drums and IBCs with finished […]

Read More »

blank

Fluid Transport and Storage Solutions

Anderson Process has recently worked with another customer to solve their fluid transport and storage needs. Challenge: The customer was looking to move from drum and tote delivery of ethyl acetate to a centralized storage system. Solution: Anderson Process provided them with 2 outdoor 5,200 gallon double walled tanks and 2 indoor 500 gallon double […]

Read More »

blank

Why Mechanical Seals Fail

Mechanical seals keep the fluid contained within pumps while the internal mechanical components move inside the stationary housing.  When mechanical seals fail, the resulting leaks can cause extensive damage to the pump and often leaves large messes that can be significant safety hazards. Besides being a crucial component to a pump running efficiently, it is […]

Read More »

blank

COVID-19 Update

As the situation surrounding COVID-19 in the United States continues to evolve, Anderson Process is taking the necessary steps to move forward responsibly. As an essential business, we are remaining open at all of our locations to support equipment in the food & beverage, power & utility, chemical, and pharmaceutical industries that provide other essential […]

Read More »

blank

Reasons Pumps Fail

The pump is the heart of any fluid processing application.  Properly specified pump drives output and directly impacts an operation’s bottom line. Unfortunately, pumps can fail at any given moment resulting in inefficient operation, equipment failures and production losses. So why do pumps fail?  We had our in-house pump expert and seasoned sales representative, John […]

Read More »

blank

ACI Fluid Fill Systems – The Anderson Difference

ACI Fluid Fill Systems have been used worldwide to dispense fluids at flow rates that range from mils per minute to gallons per minute. We offer a variety of services such as assembly line fill, vapor recovery, chiller and heat exchanger systems, control panel design and build, portable pump systems, chemical blending systems, pharmaceutical systems […]

Read More »

blank

Best Practices in Hose Safety

Hose safety often does not get the attention it deserves. Proper hose and fitting selection are critical to the safety of both your people and your profits. If a hose fails in a manufacturing or industrial processing operation, the entire production line becomes compromised, putting expensive equipment, product and lives at risk. Choosing the right […]

Read More »

blank

Custom Skids – Waste Water Treatment

Custom Solutions is a cornerstone of our business.  We regularly create custom solutions for customers, ranging from simple skids for general use to elaborate pump systems that meet the need of very specific applications.  This is an example of one of our larger projects where the customer needed a packaged solution to moving and treating […]

Read More »

blank

Chemical Solutions Brochure

Click here to download our chemical solutions brochure! Anderson Process offers a number of products, all from industry-leading brands, as well as a number of value-added services designed to help counteract the problematic nature of chemical handling.

Read More »

blank

Total Control System (TCS) Meter Rebuilds

Our repair team here at Anderson Process is uniquely positioned to deliver superior refurbishment and aftermarket services for even the most complex liquid process equipment challenges. Here are some pictures of two Total Control Systems (TCS) 682 Piston Meter rebuilds that were just finished.  These meters came to us out of calibration and with worn parts after […]

Read More »

blank

Blacoh AODDampener Product Presentation Video

Everything you need to know about Blacoh’s AODDampener is in this brief and informative video. Explore the many features and benefits, learn how the automatic air control works, and see how this new dampener performs under pressure.

Read More »

blank

T-Mag’s Sealless Pump Solution

Customer had an existing centrifugal in this application. I was not able to identify it due to the rusted tag. He was looking to use one of our competitor’s mag pumps for this application, which would have cost twice as much as the T-Mag Mag Drive Pump. He wanted a sealless pump solution…

Read More »

blank

EnviroGear® Pumps Adding G Series Internal Gear Pumps to Product Offering

EnviroGear® Pumps is pleased to announce the integration of G Series Sealed Internal Gear Pumps into its product offering.

Read More »

blank

Campbell Fittings Viewpoints w/ Terry Bradshaw Video

Click here to view more videos on our YouTube Channel!

Read More »

blank

Goodyear Engineered Products are now branded Continental ContiTech!

We are excited to announce that Goodyear Engineered Products are now branded Continental ContiTech.

Read More »

blank

Custom Engineered Tank System

This tank system filters the incoming product, and heats the oil to a set temperature.

Read More »

Custom Engineered Pumping System

Custom Engineered Pumping System

This is a Pioneer pumping system that will pump water to a gravel washer 1850 GPM at 135 feet of TDH.

Read More »

blank

Bell & Gossett Model 1510 Pump Repair

This is a Bell & Gossett model 1510 pump that we completely rebuilt including the mechanical seal, shaft sleeve, gaskets, and bearings. Prior to rebuilding the pump we thoroughly cleaned it including high pressure heated wash and sand blasting as necessary…

Read More »

blank

Kaydon Filtration Fuel Movie – Diesel Fuel Solutions

Kaydon Filtration provides fast, effective, in-line bulk fuel treatment systems that incorporate patented, single-pass filtration and coalescing technology to clean fuel as it is transferred from one tank to another.

Read More »

blank

Exciting Advancement in Seal-less Internal Gear Pump Technology

We would like to introduce an exciting advancement in seal-less internal gear pump technology from Pump Solutions Group.

Read More »

Wilden AODD Pumps

From Vine to Wine with Wilden Air-Operated Double-Diaphragm (AODD) Pumps

Modern winery facility utilizing stainless steel containers compared to old style wooden barrels.

Read More »

blank

Mouvex Eccentric Disc Pumps – The Bottom-Line Benefits of Product Recovery

Learn how Mouvex Eccentric Disc Pumps feature product-recovery capabilities that can be extremely beneficial to your facility by reducing waste and increasing ROI.

Read More »

blank

Save Money! Revolutionary Advancement in Air Operated Double Diaphragm (AODD) Pump Technology

We would like to bring to your attention an interesting product that will help you save money on energy costs on some of your challenging pump applications.

Read More »

blank

EMCO Chemical Distributors Realizes the Goal of Opening A New Manufacturing Facility and Blackmer® GX Series Sliding Vane Pumps

See the official PSG article here: Blackmer EMCO case Study – with images In 1967, after relocating to Chicago, IL, from Boston, MA, Edward Polen was working as a salesman for the Big Ben Chemical & Solution Co.

Read More »

blank

Superior AODD Pumps for Water/Wastewater Filter-Press Applications

A key piece of equipment in water/wastewater filter-press systems is the pump that sends the particulate-laden slurry into the filter press.

Read More »

blank

Wilden Video – How AODD Pumps Work

Wilden Video – How AODD Pumps Work

Read More »

blank

Hygienic Processing Plant Walk-Through

This animated video provides a virtual tour through a typical food processing facility and illustrates where Mouvex, Wilden, and other PSG pumps play a vital role in critical hygienic processing applications.

Read More »

blank

Mann Tek Dry Disconnect Couplings Video

Mann Tek Dry Disconnect Couplings are used for handling and transfer of liquids, gases and bulk powder in an economical, safe and environmental friendly way.

Read More »

blank

BLACOH BUZZ Volume 2 – The Necessity of Fluid Control

We hope you all had a great Labor Day weekend! Be sure to checkout Volume 2 of BLACOH BUZZ where you will find “The Necessity of Fluid Control” Part 2 by Gary L. Cornell. To read Part 1 please revisit the last post from Anderson Process.

Read More »

blank

BLACOH BUZZ Volume 1 – The Necessity of Fluid Control

Check out Volume 1 of BLACOH BUZZ where Gary L. Cornell of BLACOH Fluid Control, Inc. writes “The Necessity of Fluid Control” Part 1.

Read More »

blank

Wilden Releases New Video – How a Wilden Pro-Flo X AODD Pump Works

Wilden has released a new video explaining how a Wilden Pro Flo X – PX1500 Air-Operated Double-Diaphram Pumps works.

Read More »

blank

PSG Introduces a New Mouvex Self Priming Pump

Blackmer’s eccentric disc pump – Mouvex Technology, is used in an array of applications across the globe.

Read More »

blank

Blackmer Sliding-Vane “Viscosity Video” Now Available

Grand Rapids, MI – In an effort to visually demonstrate how positive-displacement pumps that feature sliding-vane technology are able to capably handle liquids of varying viscosities, Blackmer has created a “Viscosity Video” for distributor use.

Read More »

blank

Anderson Process Now Offers Precision Laser Shaft Alignment Services!

Precision Laser Shaft Alignment Services Now Offered to Our Customers.

Read More »